[Jul 18, 2023] NS0-516 Dumps Full Questions - Exam Study Guide
NCIE SAN E-Series Free Certification Exam Material from ExamsLabs with 66 Questions
Earning the NCIE certification demonstrates a deep understanding of NetApp E-Series storage solutions and a commitment to professional development in the field of storage networking. It is ideal for IT professionals who want to improve their skills and knowledge in storage networking and advance their careers in the IT industry.
To pass the NS0-516 exam, candidates must have a solid understanding of NetApp E-Series SAN solutions, including hardware, software, and best practices. They must also be able to troubleshoot common issues and provide effective solutions to complex problems. In addition, candidates must have a deep understanding of SAN architecture and protocols, including Fibre Channel, iSCSI, and FCoE.
NEW QUESTION # 26
What four resources have information to determine space and power & cooling requirements for E-Series storage systems? (Choose four.)
- A. Site Prep Guide
- B. Hardware cabling guide
- C. Install Guide
- D. Hardware Universe
- E. E-Series Power & Cooling Calculator
- F. E-Series System Data Sheets
Answer: A,C,E,F
NEW QUESTION # 27
In which two locations would you find the WWPNs for a Windows host? (Choose two)
- A. FC switch
- B. HBA vendor's utility
- C. Windows Device Manager
- D. host's BIOS
Answer: A,B
NEW QUESTION # 28
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Test SSO login
- B. Map roles
- C. Configure LDAP
- D. Configure In-Band Management
Answer: B,C
NEW QUESTION # 29
Which SANtricity client utility associates a LUN with a host OS storage system device?
- A. SMdevices
- B. SANLUN
- C. SMrepassist
- D. SANsurfer
Answer: A
NEW QUESTION # 30
What is the SANtricity Client?
- A. Inter-process communication that supports computer program subroutines
- B. A GUI or CLI that runs on a server used for storage system management
- C. An OS-dependent collection of utilities for servers attached to SANtricity managed storage systems
- D. A controller process that enables storage system management with the storage data path
Answer: B
NEW QUESTION # 31
Which interface is used to view and change the logical structure of a storage system? (Choose the best answer.)
- A. Ldisk
- B. VI
- C. AMW
- D. Disk Manager
- E. EMW
Answer: C
NEW QUESTION # 32
Hot spares provide which function? (Choose the best answer.)
- A. reserve capacity for volume groups
- B. None of the above
- C. efficiency for volumes
- D. reserve capacity for disk pools
- E. both "efficiency for volumes" and "reserve capacity for disk pools"
Answer: E
NEW QUESTION # 33
When you replace a component, why should you wait for the action to register in the storage manager?
- A. To ensure that the storage manager completes the component repair sleep cycle
- B. To ensure that the controller configuration database has a record of the change
- C. To ensure that the host OS completes SOD processing
- D. To ensure that the administrator has time to complete ESD procedures
Answer: B
NEW QUESTION # 34
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)
- A. Host Mappings tab
- B. Real-time performance monitor
- C. Unreadable sectors log
- D. Recovery Guru
Answer: A
NEW QUESTION # 35
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. twisted cables, wrong plugs, or cable material
- B. wrong switch configuration
- C. faulty SFPs, cables, or patch panels
- D. protocol errors, encoding errors, or conversion errors
Answer: D
NEW QUESTION # 36
Which type of caching on E-Series systems should be enabled according to NetApp recommended practices?
- A. Write
- B. Write mirroring
- C. Read
- D. Prefetch
Answer: B
NEW QUESTION # 37
What are two types of logical structures that volumes in the E-Series system use? (Choose two.)
- A. volume groups
- B. volume pools
- C. disk pools
- D. aggregates
Answer: A,C
NEW QUESTION # 38
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on in any order, since the order does not matter
- B. Power up A-side power supplies first, then power up all B-side power supplies.
- C. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- D. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
Answer: D
NEW QUESTION # 39
The out-of-band connection is an Ethernet connection from the storage manager host to the LAN, and from the LAN to which location?
- A. port E of the controller
- B. port 2 of the ESM
- C. port 1 of the I/O host
- D. port 1 of the controller
Answer: D
NEW QUESTION # 40
What would be the minimum configuration required to support a drawer-protected 20-drive DDP? (Choose the best answer.)
- A. An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives.
- B. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.
- C. An E2624 with four DE5600 Expansion Chassis, containing a total of 6, 1.6TB SSD and 96, 3T NL-SAS drives.
- D. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives.
Answer: B
NEW QUESTION # 41
A NetApp recommended best practice is to cable disk shelves to a controller shelf using the top-down-bottom-up method.
Why?
- A. It protects against shelf failure.
- B. It protects against power outages.
- C. It protects against drawer failure.
- D. It protects against disk failure.
Answer: A
NEW QUESTION # 42
......
The NS0-516 certification exam is ideal for professionals who work with data storage systems and want to validate their skills and knowledge in this area. NetApp Implementation Engineer SAN Specialist E-Series (NCIE) certification exam is recognized by many organizations and is highly valued in the IT industry. Professionals who pass NS0-516 exam are considered to be experts in NetApp's E-Series SAN solutions and are highly sought after by employers.
Dumps Brief Outline Of The NS0-516 Exam: https://certificationsdesk.examslabs.com/NetworkAppliance/NCIE-SAN-E-Series/best-NS0-516-exam-dumps.html